How to Guides

Thruxton 1200/R - How to remove the rear taillight assembly

1 - Remove the seat (see how to remove the Thruxton 1200/r seat) 2- Disconnect the battery (see how to remove the Thruxton 1200/R battery) Pro Tip: When disconnecting the battery always disconnec...

How to Install Shotgun Exhaust

  The Shotgun Exhaust is available in multiple fitments. Please view the correct guide for your motorcycle below:  How to Install Triumph Motorcycle Shot Gun Exhaust  Install Guide for Scrambler 1...

Predator Pro Slip On Exhaust Install Guides

How to Install Predator Pro Slip On Exhaust The Predator Pro Slip On Exhaust is a bolt on muffler that installs with common tools. If you are uncertain, please contact your local Triumph dealer. E...

Thruxton 1200/R - How to Remove the Rear Turn Signals

1 - Remove the seat (How To Remove the Thruxton 1200 Seat) 2 - Disconnect the battery (see hot to remove the Thruxton 1200/R Battery) Note: When disconnecting the battery always disconnect the ne...

How to Install Pan Taillight Bonneville Bobber

Fits the following models: Triumph Bonneville Bobber (2017+) Triumph Bonneville Bobber Black (2017+) Last Updated: 11-27-2019 REMOVAL - BC Pan Taillight 1. Properly support the vehicle with a s...

How to Install Rear Turn Signals Bonneville Bobber

Step by step guide on how to install the British Customs Rear Turn Signals on a Triumph Bobber and Bobber Black

Pan Tail Light Install - Street Scrambler

Product: Pan Tail LightSKU: BC1606.2.103.R Download PDF Installation Guide If you have questions or concerns about the installation process, please see here:  https://britishcustoms.com/pages/inst...

How to Install Rear Retro Turn Signals Bonneville T100

Performed on a 2019 Triumph Bonneville T100 Kit Includes: Left & Right Turn Signals (2) Flat washers (2) Lock washers (2) Star washers (2) Bolts  

How to Remove the Headlight Bracket on Triumph Street Scrambler

Before starting work, make sure that the motorcycle is stabilized and adequately supported. You don't want your bike falling and causing injury to you or to the bike. If the engine has been running...

How to Remove the Headlight on a Triumph Street Scrambler

Before starting work, make sure that the motorcycle is stabilized and adequately supported. You don't want your bike falling and causing injury to you or to the bike. If the engine has been runnin...

How to Install Sleeper Pro Bonneville Bobber / Speedmaster

Step by step guide on how to install the Sleeper Pro for the Triumph Bobber / Bonneville Speedmaster. Purchase this Exhaust here: Slip-On Exhaust for Triumph Bonneville SE Fitment Triumph Bonnev...

Speed Twin - Install M-Spy Bar End Mirror Kit

Model: Triumph Speed Twin (2019+) 1. Using a 4mm Allen remove the factory bar end. Save the bolt for installation 2. Using a 5mm Allen Remove the factory bar end mirror 3. Using a 4mm Allen loo...

How to Install Front Turn Signals Bonneville Bobber

Step by step guide on how to install the British Customs Front Turn Signals on a Triumph Bobber and Bobber Black. Fitment Triumph Bonneville Bobber (2017+) Triumph Bonneville Bobber Black (2017+...

How to Remove Handlebars

STEP BY STEP GUIDE  Left Side - Handlebar Removal 1. Using a 4mm Allen remove the factory bar end 2. Using a 5mm Allen remove the factory bar end mirror 3. Using a Phillips Screw Driver remove t...

How to Remove Handlebar Clamps

STEP BY STEP GUIDE  1. If upgrading the handlebars (see How To Remove Handlebar) 2. Using a 14mm Socket loosen the left-hand bolts that secure the handlebar clamps to the triple tree. Do not remov...

How to Install British Customs Handlebar Clamps

Available for purchase here: Handlebar Clamps Thank you for choosing this British Customs Product. These British Customs products have been designed and tested to fit multiple Triumph Motorcycles...

How to Install The Air Box Removal Kit Triumph America & Speedmaster

  1. Remove the Factory Air Box 2. Remove the hardware  and disassemble the roll pin hardware.   3. Remove the 2 Rubber Mounting bungs from the center section of the frame and Install the suppl...

How to Install Bonneville T120 Predator 3.5 Exhaust

Performed on a 2020 Triumph Bonneville T120 Black This Exhaust is available for purchase here: This exhaust is designed for a bolt on installation. If at any time you do not feel comfortable wit...

How to Install Scrambler 1200 Shotgun Exhaust

Step by step guide on installing the British Customs Shotgun Exhaust on Triumph Scrambler 1200.

How to remove Bonneville Speed Twin Stock License Plate

Publish Date: 12/05/2019 Removal - License Plate Bracket 1. Using the ignition key remove the seat.  Turn the key counterclockwise 2. Using an 8mm wrench, remove the (2) bolts that secure the fe...

How to install Bonneville Speed Twin Fender Eliminator

Publish Date: 12/05/2019 Part #: BC410-058-B Thank you for choosing this British Customs Product.   This British Customs product has been designed and tested to fit the following Triumph Motorcycl...

Thruxton 1200/R - How to remove the Seat

1- Insert the ignition key into the seat lock and turn counterclockwise.   Press down and lift up on the seat.   2 - Slide the seat towards the rear fo the bike and remove Pro Tip: Store the seat...

How to install BC ABS BRKE LINE - Triumph Bonneville T100 / T120 (2016+)

WARNING  The how-to guide is proved for information purposes only. The guide assumes you have general mechanical knowledge and have the ability to remove and replace components on your motorcycle...