- Description
The D2 light was designed to create an impressive beam of light that is the perfect balance between night time distance and daytime conspicuity. Don’t be fooled by their smaller size; the installed spot lenses throw a beam of light 525 feet down the road, while the included flood lenses create a beam that is 165 feet wide and carry an official E-Mark certification.
DENALI’s innovative DataDim™ Technology enables the lights to be upgraded in seconds to dual intensity by connecting a plug-n-play DataDim™ Controller (DNL.WHS.11000) that will automatically switch the lights between half and full intensity with your vehicle's original high beam switch.
The DENALI D2s feature durable black powder-coated finishes and special cooling fins to make sure the LED itself runs cool and bright. New for the DENALI 2.0 series is a special Impact PC™ corrosion proof bezel that ensures your lights will continue to look great even after repeated stone and debris impacts. Low profile hinge mounts offer secure mounting and include stainless steel M8 mounting hardware for installation on light bars or model specific light mounts.
Features:
- LEDs 10 Watt Cree XPL HI (per lamp)
- Power Draw: 1.6 amps (total)
- Beam Distance (spot): 525ft
- Beam Width (spot): 75ft
- Raw Lumens: 2190
- Intensity: Single Intensity Harness
- DataDim™ Compatible: Yes
- Operating Voltage: 12v
- Pod Size 2.2in diameter x 2.4in deep
Specifications:
- LED’s: (2x) 10 Watt Cree XPL HI
- Power Draw: 1.6 Amps
- Beam Distance (Spot): 525 Feet
- Beam Width (Spot): 75 Feet
- Raw Lumens: 2190
- Intensity: Single Intensity Harness
- DataDim™ Compatible: Yes
- Operating Voltage: 12 VDC
- Pod Size: 2.2” Round x 2.4” Deep (each)
- Pod Weight: 0.6 lbs (each)
- IP67 Waterproof & Submersible
- E Mark Approved Flood Lenses
D2 Kit Contents:
- (2) LED Light Pods
- (2) Spot lenses (pre-installed)
- (2) E-Mark approved elliptical flood lenses
- (1) HotSwap™ single intensity wiring harness
- (1) DrySeal™ waterproof illuminated switch
- (1) 7/8in Handlebar switch mount
- (1) 1in Handlebar switch mount
- (2) Hinge mounts with M8 stainless steel hardware
- (4) Zip ties & (1) adhesive mounting square
Fitment Note: This is a universal product, not model specific.
The D2 light was designed to create an impressive beam of light that is the perfect balance between night time distance and daytime conspicuity. Don’t be fooled by their smaller size; the installed spot lenses throw a beam of light 525 feet down the road, while the included flood lenses create a beam that is 165 feet wide and carry an official E-Mark certification.
DENALI’s innovative DataDim™ Technology enables the lights to be upgraded in seconds to dual intensity by connecting a plug-n-play DataDim™ Controller (DNL.WHS.11000) that will automatically switch the lights between half and full intensity with your vehicle's original high beam switch.
The DENALI D2s feature durable black powder-coated finishes and special cooling fins to make sure the LED itself runs cool and bright. New for the DENALI 2.0 series is a special Impact PC™ corrosion proof bezel that ensures your lights will continue to look great even after repeated stone and debris impacts. Low profile hinge mounts offer secure mounting and include stainless steel M8 mounting hardware for installation on light bars or model specific light mounts.
Features:
- LEDs 10 Watt Cree XPL HI (per lamp)
- Power Draw: 1.6 amps (total)
- Beam Distance (spot): 525ft
- Beam Width (spot): 75ft
- Raw Lumens: 2190
- Intensity: Single Intensity Harness
- DataDim™ Compatible: Yes
- Operating Voltage: 12v
- Pod Size 2.2in diameter x 2.4in deep
Specifications:
- LED’s: (2x) 10 Watt Cree XPL HI
- Power Draw: 1.6 Amps
- Beam Distance (Spot): 525 Feet
- Beam Width (Spot): 75 Feet
- Raw Lumens: 2190
- Intensity: Single Intensity Harness
- DataDim™ Compatible: Yes
- Operating Voltage: 12 VDC
- Pod Size: 2.2” Round x 2.4” Deep (each)
- Pod Weight: 0.6 lbs (each)
- IP67 Waterproof & Submersible
- E Mark Approved Flood Lenses
D2 Kit Contents:
- (2) LED Light Pods
- (2) Spot lenses (pre-installed)
- (2) E-Mark approved elliptical flood lenses
- (1) HotSwap™ single intensity wiring harness
- (1) DrySeal™ waterproof illuminated switch
- (1) 7/8in Handlebar switch mount
- (1) 1in Handlebar switch mount
- (2) Hinge mounts with M8 stainless steel hardware
- (4) Zip ties & (1) adhesive mounting square
Fitment Note: This is a universal product, not model specific.
