How to Remove Factory Mid Pipe - Triumph Speed Twin 1200

HOW TO REMOVE MIDPIPE - LEFT SIDE

1 - Using a 5mm Allen remove the (1) bolt that secures the heat shield to the Midpipe.  Save the (1) heat shield, (1)bolt and (1) clamp for installation.   

2 - Using a 10mm wrench, loosen the exhaust clamp that secures the mid-pipe to the catalytic converter.  

3 - Using a 12mm socket remove the mounting (1) bolt that secures the mid-pipe to the frame.  

4 - Position the kickstand in the down position and remove the mid-pipe.  Pull the mid-pipe away from the bike to remove.  

HOW TO REMOVE MID PIPE - RIGHT SIDE

1 - Using 5mm Allen remove the (1) bolt that secures the heat shield to the mid-pipe.  Save the (1) heat shield, (1) bolt, and (1) clamp for installation.  

2 - Using a 10mm wrench, loosen the exhaust clamp

3 - Using a 12 mm socket and 12mm wrench remove the Midpipe mounting bolt. 

4 - Remove the Midpipe by pulling away from the bike and sliding the heat shield backward