Turn Signal Buyer's Guide

PLUG & PLAY LIGHTING

Upgrade your lighting without cutting or splicing. Our Turn Signal Kits are designed specific to your bike and come pre-wired for a plug n play installation. These kits come ready to install right away. Simply bolt on the pre-assembled brackets, plug in the connectors to the factory harness and you are good to go. Scroll down to learn more.

>

Upgrading the lighting components on your Triumph will make a huge difference in the aesthetics of your build. By default these bikes ship with large, unsightly turn indicators. To replace these with something more low profile you used to have to pull out the soldering gun and start splicing some wires. Not anymore! With our new Turn Signal Kits, you are able to get the right kit for you bike, uninstall the factory lighting and simply plug in / bolt on your new kit from British Customs.

Why this matters: If you decide to upgrade your Tail Light with one of our Pan Tail Lights or Retro Tail Lights or perhaps a Fender Eliminator Kit, you've just eliminated the location used to mount your turn signals. Fortunatley we have a Kit for every Triumph Modern Classic that takes the pain out of the process.

The twist: Maybe you like the factory tail light or have another Tail Light you are going to retrofit on the bike. Guess what, our Turn Signal Kits will still work for you! Same deal, find the right kit for you bike, install with a few bolts and a Plug n Play wiring harnees and you are done.

Now that we've gone over WHY you invest in this upgrade, lets go over WHAT you need to accomplish this. First lets break down the available mounting positions. Some of these options will work on multiple bikes, some are designed specifically for certain models. You can use the dropdown menus below to see what fitments are available for a given kit. To sum it up we offer the following options:

Sold out

Sold out

Sold out

Sold out

Sold out

Sold out

Sold out

Sold out

PLUG & PLAY LIGHTING

Upgrade your lighting without cutting or splicing. Our Turn Signal Kits are designed specific to your bike and come pre-wired for a plug n play installation. These kits come ready to install right away. Simply bolt on the pre-assembled brackets, plug in the connectors to the factory harness and you are good to go. Scroll down to learn more.

>

Upgrading the lighting components on your Triumph will make a huge difference in the aesthetics of your build. By default these bikes ship with large, unsightly turn indicators. To replace these with something more low profile you used to have to pull out the soldering gun and start splicing some wires. Not anymore! With our new Turn Signal Kits, you are able to get the right kit for you bike, uninstall the factory lighting and simply plug in / bolt on your new kit from British Customs.

Why this matters: If you decide to upgrade your Tail Light with one of our Pan Tail Lights or Retro Tail Lights or perhaps a Fender Eliminator Kit, you've just eliminated the location used to mount your turn signals. Fortunatley we have a Kit for every Triumph Modern Classic that takes the pain out of the process.

The twist: Maybe you like the factory tail light or have another Tail Light you are going to retrofit on the bike. Guess what, our Turn Signal Kits will still work for you! Same deal, find the right kit for you bike, install with a few bolts and a Plug n Play wiring harnees and you are done.

Now that we've gone over WHY you invest in this upgrade, lets go over WHAT you need to accomplish this. First lets break down the available mounting positions. Some of these options will work on multiple bikes, some are designed specifically for certain models. You can use the dropdown menus below to see what fitments are available for a given kit. To sum it up we offer the following options:

Sold out

Sold out

Sold out

Sold out

Sold out

Sold out

Sold out

Sold out

PLUG & PLAY LIGHTING

Upgrade your lighting without cutting or splicing. Our Turn Signal Kits are designed specific to your bike and come pre-wired for a plug n play installation. These kits come ready to install right away. Simply bolt on the pre-assembled brackets, plug in the connectors to the factory harness and you are good to go. Scroll down to learn more.

>

Upgrading the lighting components on your Triumph will make a huge difference in the aesthetics of your build. By default these bikes ship with large, unsightly turn indicators. To replace these with something more low profile you used to have to pull out the soldering gun and start splicing some wires. Not anymore! With our new Turn Signal Kits, you are able to get the right kit for you bike, uninstall the factory lighting and simply plug in / bolt on your new kit from British Customs.

Why this matters: If you decide to upgrade your Tail Light with one of our Pan Tail Lights or Retro Tail Lights or perhaps a Fender Eliminator Kit, you've just eliminated the location used to mount your turn signals. Fortunatley we have a Kit for every Triumph Modern Classic that takes the pain out of the process.

The twist: Maybe you like the factory tail light or have another Tail Light you are going to retrofit on the bike. Guess what, our Turn Signal Kits will still work for you! Same deal, find the right kit for you bike, install with a few bolts and a Plug n Play wiring harnees and you are done.

Now that we've gone over WHY you invest in this upgrade, lets go over WHAT you need to accomplish this. First lets break down the available mounting positions. Some of these options will work on multiple bikes, some are designed specifically for certain models. You can use the dropdown menus below to see what fitments are available for a given kit. To sum it up we offer the following options:

Sold out

Sold out

Sold out

Sold out

Sold out

Sold out

Sold out

Sold out

PLUG & PLAY LIGHTING

Upgrade your lighting without cutting or splicing. Our Turn Signal Kits are designed specific to your bike and come pre-wired for a plug n play installation.

>

Upgrading the lighting components on your Triumph will make a huge difference in the aesthetics of your build. By default these bikes ship with large, unsightly turn indicators. To replace these with something more low profile you used to have to pull out the soldering gun and start splicing some wires. Not anymore! With our new Turn Signal Kits, you are able to get the right kit for you bike, uninstall the factory lighting and simply plug in / bolt on your new kit from British Customs.

Why this matters: If you decide to upgrade your Tail Light with one of our Pan Tail Lights or Retro Tail Lights or perhaps a Fender Eliminator Kit, you've just eliminated the location used to mount your turn signals. Fortunatley we have a Kit for every Triumph Modern Classic that takes the pain out of the process.

The twist: Maybe you like the factory tail light or have another Tail Light you are going to retrofit on the bike. Guess what, our Turn Signal Kits will still work for you! Same deal, find the right kit for you bike, install with a few bolts and a Plug n Play wiring harnees and you are done.

Now that we've gone over WHY you invest in this upgrade, lets go over WHAT you need to accomplish this. First lets break down the available mounting positions. Some of these options will work on multiple bikes, some are designed specifically for certain models. You can use the dropdown menus below to see what fitments are available for a given kit. To sum it up we offer the following options:

Sold out

Sold out

Sold out

Sold out

Sold out

Sold out

Sold out

Sold out
Previous article The Californian 2018
Next article Garage Builder: Renato Amarante

Leave a comment

* Required fields